Matrix Appliances MHG100WH Manuale Scaricare il pdf (Pagina 10)

How to Install the Hob

How to install the hob:

Overall dimensions of the hob: Width: 580mm Depth: 500mm

Worktop cut-out dimensions: Width: 557mm Depth: 477mm

1. Make the required hole in the worktop. Note that before doing this, check the instructions supplied with any cooker hood

to ensure that you will have the required clearance. The cut-out (Fig 6) shows a 61.5mm gap from the wall to the cut-out

edge. The distance for the hob, when ﬁtted, to the back wall is 50mm.

2. Position the hob seal, as shown in the diagram below (Fig 8), ensuring that the ends meet without overlapping. Do not use

silicone type sealant.

3. Secure the hob to the worktop using the ﬁxing brackets and screws supplied, as shown in the following diagram (Fig 9).

Remove any excess sealant after tightening the brackets.

400mm

750mm

Fig.6 Fig.7

Fig.8 Fig.9

185mm 185mm

>61.5mm

560cm

150mm150mm

557mm

477mm

3cm

4cm

1 2 ... 5 6 7 8 9 10 11 12

Nessun commento

Matrix Appliances MHG100WH Manuale Pagina 10